With an all new truck comes an all new suspension. Now available for the 2019 model year RAM 1500 4WD trucks BDS Suspension has released new 6" IFS lift systems. Based around the tried and true high clearance technology that has made BDS the go to for RAM suspension lifts, these systems have been designed from the ground up to get more out of your new RAM. This new 6" lift system is the first of many new BDS options to come available for the new trucks bringing you on road comfort, off-road capability and clearance for 35-37" tires.
In the rear of this 6" lift system the factory coil springs are replaced with 5" ProRide coil springs to level the stance. With the additional ride height the rear suspension geometry is corrected with control arm relocation brackets, a bolt-on rear track bar relocation bracket to recenter the axle, extended length sway bar links to correct operating angle, and bump stop extensions to properly limit up travel. The rear of these kits are rounded out with your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance. All kits come finished in a durable textured black powdercoat and sent with all hardware packs to complete the install along with step-by-step installation instructions. All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS's No Fine Print Warranty, ESC System compatibility and a 5year-100mile drivetrain warranty to match the dealer. Improve the look and capability of your 2019 RAM 1500 truck with this new 6" lift system from BDS Suspension.
Tire & Wheel Combinations
37" x 12.50" w/17 x 9 and 4.5" back spacing
37" x 12.50" w/18 or 20 x 9 and 4.5-5" back spacing
*Trimming may be required*
NOTE
1. This system will not fit vehicles equipped with 22" wheels from the factory due to a difference in hub bore size.
2. Stock 17" wheels can not be re-installed. Stock 20" can be reinstalled with factory tire.
3. Will NOT fit adjustable air suspension equipped models.
4. This kit is FMVSS No.126 Compliant
FMVSS No.126 compliant
The NHTSA's Federal Motor Vehicle Safety Standard (FMVSS) No.126 requires all new passenger vehicles to include Electronic Stability Control (ESC) systems that meet certain standards that can be tested through a comprehensive series of evasive maneuvers. Aftermarket products must meet these standards as well.
***CALLS ONLY*** Texts and Emails will be ignored. If this ad is up, the item is STILL Available